How to Store Christmas Inflatables

How to Store Christmas Inflatables

How to Store Christmas Inflatables is the focus of this guide, written from the product details and setup advice already published on Christmas Inflatables.

The most important rule for storing a Christmas inflatable is also the simplest one: do not pack it away until it is clean enough to store and completely dry, including the folds you cannot see at first glance. Moisture sealed into a bin is what leads to mildew, stuck-together fabric, and an unpleasant surprise the following November. This guide covers taking the decoration down, drying it, folding it, packing bins or bags, keeping the accessories together, and checking the inflatable again when the off-season ends. It pairs with the Christmas inflatable setup and care guide at the start of the season and with the Christmas inflatable troubleshooting guide if you find a tear or a stiff zipper while you pack. For weather damage that happened before take-down, read the Christmas inflatable weather and safety guide as well.

Watch a real setup video, then follow the steps below for the model you bought.

The video above shows a real process for cleaning and putting yard inflatables away. Use it as a visual overview, and follow the slower drying and packing steps below so the decoration you store is actually dry, not just folded.

Take the inflatable down in a calm, planned way

Pick a dry stretch of weather if you can. Unplug the inflatable at the outlet or timer first, not by tugging the cord out of the blower. Once power is off, the figure will deflate; that is normal. Open the zipper, cap, or deflation opening the instructions describe so air can leave without stressing a seam, and do not force the last of the air out by standing hard on the fan housing or the lights. Remove the stakes and tethers as the decoration goes down so they are not pulled through the fabric or lost in the grass. Count them against the packing list if you still have it. The 10 ft inflatable Christmas tree with a music box, for example, lists six stakes and three tethers plus a storage bag; putting those parts in one place now is easier than buying replacements next year.

If the inflatable is wet from rain or snow, move it to a place where it can dry rather than stuffing it into the original box on the same night. A garage floor with airflow, a covered porch, or a clean tarp in a dry room can all work, as long as the blower and cord stay out of puddles and are not still plugged in. Brush off leaves, grass, and road grit while the fabric is still spread out; dirt is harder to remove after it has sat in a folded crease for months. Look for new tears, a loose seam, or a zipper that no longer closes, and decide whether a simple patch should happen now, while you can still see the damage, rather than in a rush next season. The troubleshooting guide explains basic leak finding and patching with the unit unplugged.

10 ft inflatable Christmas tree with built-in LED lights and a music box

Clean gently, then dry completely

Most yard inflatables only need a mild cleaning. Shake or brush off loose debris, then wipe the fabric with a cloth and a small amount of mild soap in water if it is muddy or stained. Work gently; aggressive scrubbing can wear printed details or thin coatings. Keep soapy water away from the blower’s electrical parts, the plug, and any light connections. Rinse the washed areas with clean water so soap is not stored in the fabric, and pay attention to the base, which often holds the most soil.

Drying is the step that protects the decoration more than any particular folding style. Spread the inflatable out, or hang it in a way that does not put a sharp strain on a small loop, in a well-ventilated space until the interior and the exterior are dry to the touch. Open zippers so air can move through the body. After a rain or a snow display, this can take longer than a single evening, especially in a closed garage. Check hidden folds, the area around the blower, and the inside of a snow globe or wide scene, not only the outer surface. If you feel any remaining dampness, keep drying. A fan in the room can help with air movement; do not use a high-heat source against the fabric, and do not pack the unit because you are out of floor space if it is still wet.

If you used water bags or bladders, empty them, rinse them if they held dirty water, and dry them separately so they do not leak into the folded inflatable. Sandbags or built-in ballast should be dry as well. Some nativity and snow globe listings, including the 8 ft long nativity scene inflatable and the 6 ft snow globe with Santa and a penguin, mention built-in sandbags or a zippered bottom for extra weight; follow the instructions for those features when you pack, and do not store a zipper full of wet sand or damp fill.

8 ft long inflatable nativity scene with Mary, Joseph, Baby Jesus, and built-in LED lights

For step-by-step cleaning, including how to treat mold and mildew spots safely, see how to clean a Christmas inflatable.

Deflate the rest of the way and fold loosely

When the inflatable is dry, make sure it is fully deflated. Work remaining air toward the opening with your hands rather than sharp creases from tight rolling. The goal is a compact bundle that will fit your bag or bin, not a hard, sharply folded brick. Avoid folding repeatedly in the exact same tight line across a printed face, a window in a snow globe, or a seam at a tether loop. Looser folds with fewer hard creases are easier on the material over several seasons. For a step-by-step walkthrough, see how to dry and fold a Christmas inflatable for storage.

Protect the blower, the cord, and any hard or lighted parts as you fold. Do not bury the fan under a tightly compressed stack of fabric if you can wrap the body so the housing sits on the outside or in a corner of the bin where it will not be crushed. Coil the cord loosely, without kinks, and keep the plug from digging into the fabric. If the model has animation hardware, such as the animated Jack Skellington in a chimney inflatable, extra care around that mechanism is worthwhile; do not force a moving part flat under a lid.

Close or open zippers as the instructions specify for storage. Some directions tell you to close certain zippers so debris stays out; others want an opening left so any last bit of moisture can escape. When the instructions are silent, a slightly vented but clean bundle in a bin with a lid that is not vacuum-sealed is a reasonable approach. Do not shrink-wrap a recently used outdoor inflatable in a way that traps leftover dampness.

Animated Jack Skellington in a chimney, a light-up Nightmare Before Christmas inflatable

Bags, bins, and the original box

If you still have the original box and it is in good condition, it is a convenient, correctly sized container and often has the model information printed on the outside. A manufacturer’s storage bag, such as the bag included with some trees and dinosaurs in this store, is also a good option for keeping the fabric together, especially if you then place the bag inside a tote so it is not sitting directly on a damp basement floor. If the original packaging is gone, use a clean plastic bin with a lid that closes without a struggle. The bin should be large enough that you are not jamming the blower or forcing a 10 ft or 12 ft decoration into a space meant for a 4 ft figure.

Put the folded inflatable in first, then add a clearly labeled bag of small parts: stakes, tethers, clips, the instructions, and any patch kit that came with the unit. That bag is easy to lose if it is tossed in loose, and it is the difference between a fast setup next year and a trip to replace stakes. Do not store leftover food, batteries that could corrode, or dirty garden tools in the same tote. If you have several inflatables, one bin per decoration, or at least one bin per size group, is easier to lift and to label than a single overloaded trunk.

Label the lid and one side of the bin with the character and the approximate size, such as “10 ft Mickey nutcracker inflatable” or “6 ft snowman family snow globe.” Future you will not want to open every tote to find the 4.2 ft Hello Kitty inflatable or the 5 ft Minions Kevin building a snowman inflatable. If you keep a simple list of what you own, you can also plan next year’s display with the guide on how to choose a Christmas inflatable before you add another large piece that will not fit in the storage you already have.

4.2 ft Hello Kitty Christmas inflatable wearing a sweater and scarf with LED lights

Where to keep inflatables during the off-season

Store the bins in a cool, dry, reasonably stable place, away from direct sun and away from heaters, water heaters, and damp exterior walls that sweat in summer. A dry interior closet, a climate-stable spare room, or a well-ventilated, dry area of a basement is usually better than a shed that leaks or an attic that gets extremely hot. High heat can stress fabric and electrical parts; persistent damp can undo all of the drying you just did. Keep the bins off a bare concrete floor if that floor gets wet, using a shelf or a pallet so a surprise leak does not sit against the lid for months.

Pest control is part of storage too. A lidded plastic tote is more resistant to mice and insects than an open cardboard box on a garage floor, but it is not a reason to store an inflatable next to pet food or a garbage can. Do not use mothballs or harsh chemical treatments on the fabric unless a product is specifically intended for that use and is safe for the materials; leftover odor in a holiday decoration is difficult to remove. Check the storage area once during the year if you can, especially after a storm or a plumbing leak, so a wet bin does not sit unnoticed until November.

If you must store decorations in a garage or shed, choose the driest, most insulated corner, keep lids closed, and accept that you may need to air the inflatables out for a day before setup if the space is musty. Never store a unit while it is still plugged in, and never leave batteries, if any accessory used them, inside a compartment for months, because leaking batteries can damage a bin and anything around them.

Before you set the display up next season

When you bring the bin out again, open it in a clean space and inspect before you plug anything in. Confirm that the fabric is dry and free of mildew, that the blower housing and cord are undamaged, and that you still have the stakes and tethers. Repair small holes with the patch kit or a suitable fabric repair while the decoration is empty and dry. If you smell mildew or find extensive staining, unpack the inflatable and dry it thoroughly in fresh air, then clean it gently before you decide whether it is still in good enough condition to display. If you find a small hole or tear during that check, follow how to patch a hole in a Christmas inflatable before the first inflation.

From there, go back to the Christmas inflatable setup and care guide and the character instructions for your model, such as how to set up the Christmas tree inflatable or how to set up the snow globe inflatable. Use a GFCI-protected outlet and an outdoor-rated cord if the inflatable is going outside, and restake it properly rather than assuming last year’s holes in the lawn are still useful. If something does not fill, the lights stay off, or the fan sounds wrong after storage, use the troubleshooting guide before you leave the decoration on overnight.

A storage checklist

  1. Unplug the inflatable, let it deflate, and collect every stake, tether, and instruction sheet.
  2. Brush off debris and clean the fabric gently with mild soap if needed, keeping water away from electrical parts.
  3. Empty and dry water bags or other ballast.
  4. Dry the inflatable completely, inside and out, with zippers opened for airflow, before you fold it.
  5. Fold loosely, protect the blower and cord, and avoid sharp creases across faces and seams.
  6. Pack the decoration in the original box, a storage bag, or a generously sized lidded bin, with small parts in a labeled bag.
  7. Label the bin with the character and size, and store it in a cool, dry place off a damp floor.
  8. Inspect again at the start of the next season before you plug the unit in.

Good storage is what makes the rest of these guides useful the following year. If you are planning a new piece for the next display, measure your remaining bin space as well as your yard, and use how to choose a Christmas inflatable so the decoration you buy is one you can also put away.

Frequently asked questions

Do I have to dry a Christmas inflatable before storing it?

Yes. Packing a damp inflatable is a common cause of mildew and stuck fabric. Spread it out or hang it with zippers open until the inside and outside are dry to the touch, even if that takes more than one day after rain or snow.

How should I fold a Christmas inflatable?

Fully deflate it, then fold it loosely enough to fit your bag or bin without hard, repeated creases across the face, seams, or lights. Protect the blower and coil the cord without sharp kinks. Follow any zipper positions given in the instructions.

Is a plastic bin better than the original box?

The original box works if it is still sturdy and stored in a dry place. A lidded plastic bin offers more protection from moisture and pests, especially if you also use a storage bag inside it. Choose a bin that is large enough not to crush the blower.

Where should I store Christmas inflatables in the off-season?

Use a cool, dry location away from direct sun, heaters, and damp floors. A dry closet or a stable indoor space is usually better than a leaky shed or a very hot attic. Keep lids closed and the bins off wet concrete.

What should I do with stakes and tethers at the end of the season?

Clean them if needed, dry them, and put them in a labeled bag in the same bin as the inflatable, along with the instructions and any patch kit. Counting the parts against the original packing list now prevents a missing-stake surprise next year.

When should I inspect an inflatable after storage?

Open the bin at the start of the next season, before you plug the decoration in. Check the fabric, blower, cord, and accessories, repair small dry-weather damage, and then follow the setup and care guide to put the display back up.