How to Clean a Christmas Inflatable (Mold and Mildew)

How to Clean a Christmas Inflatable

How to Clean a Christmas Inflatable is the focus of this guide, written from the product details and setup advice already published on Christmas Inflatables.

Mud splashes, grass stains, bird droppings, and gray spots of mildew are all part of a season outdoors. The good news is that most Christmas inflatables clean up well with nothing more than a soft cloth, mild soap, and water. The key is being gentle and getting it completely dry before it goes back in the bin. This guide shows how to clean a Christmas inflatable, how to deal with mold and mildew, and what to avoid. It is part of our how to store Christmas inflatables guide.

Safety first: unplug the inflatable before you clean it. Never soak it or spray water at the blower, the adapter, the plug, or the lights.

What you need

  • A soft brush or a dry cloth for loose dirt
  • Two buckets: one with water and a little mild dish soap, one with clean water
  • Soft microfiber cloths or a sponge (no scouring pads)
  • White vinegar and a spray bottle for mildew spots
  • A clean tarp or a dry patch of lawn to work on

Step 1: Clean it while it is inflated

Fabric is much easier to clean when it is smooth and tight. On a dry, calm day, set the inflatable up, plug it in, and let it fill. Then unplug it before you start wiping if you need to reach near the blower. Brush off grass, leaves, and dried dirt first, so you are not turning dust into mud.

6 ft highland cow Christmas inflatable in a Santa hat and red scarf

Most of our outdoor inflatables use coated polyester. The 6 ft highland cow inflatable lists heavy-duty waterproof polyester fabric, and the 6 ft up and down chimney inflatable lists durable polyester fabric that resists wrinkles, shrinking, and fading after repeated washing. Even durable fabric lasts longer with gentle hand cleaning.

Step 2: Wipe it down with mild soap

Dip a soft cloth in the soapy water, wring it out until it is damp, not dripping, and wipe the inflatable in sections. Work from the cleanest areas toward the dirtiest, which is usually the base. Use light pressure and repeat passes instead of scrubbing hard, especially over printed faces and details. Then wipe everything again with a cloth rinsed in clean water so no soap is left behind. Soap residue attracts dirt.

6 ft red chimney Christmas inflatable with up and down motion

Step 3: Treat mold and mildew spots

Gray or black spotting usually means the inflatable was put away damp or sat in a wet spot. To treat it:

  1. Spot-test first. Try your cleaner on a small hidden area and let it dry to make sure the color does not change.
  2. Use diluted white vinegar. Mist the spots with a vinegar and water mix, let it sit for a few minutes, then wipe gently with a soft cloth.
  3. Rinse. Wipe the area with clean water to remove the vinegar.
  4. Dry and check again. Wet fabric can make stains look darker. Let it dry before deciding whether it needs another pass.

Skip bleach, ammonia, and harsh scrubbers. They can fade colors and strip the coating that helps the fabric shed water. If the fabric has become sticky, the smell will not go away after cleaning and drying, or mold has reached the blower or wiring, it may be time to replace the decoration.

This video walks through cleaning and storing yard inflatables at the end of the season.

Step 4: What not to do

  • No washing machine or dryer. The blower, wiring, and lights are built in.
  • No pressure washer. It can tear seams and push water into the electrical parts.
  • No soaking. Never submerge the blower or adapter.
  • No heat. Do not use a hair dryer or heater to speed up drying.
  • Keep zippers closed. Some figures hold loose filler. The 6 ft inflatable snow globe listing says to zip its bottom opening fully to avoid losing the foam snowflakes, so keep it zipped while you clean.

Step 5: Dry it completely

This is the step that prevents mildew from coming back. Plug the inflatable in on a dry day and let the blower run so air moves through the inside. Check the seams, the base, and the area around the blower by hand. Only fold it once it is dry to the touch inside and out. Our guide on how to dry and fold a Christmas inflatable for storage walks through drying and folding step by step, and how to keep Christmas inflatables dry in the rain explains drying after a storm during the season.

8 ft lighted stacking elves Christmas inflatable

Step 6: Check for damage, then store it

While it is clean and laid out, look for small holes, loose seams, or a sticky zipper. Fix them now using our guide on how to patch a hole in a Christmas inflatable. The 8 ft lighted stacking elves inflatable listing notes that it is easy to deflate and store for future Christmas celebrations, which is true of most inflatables once they are clean and dry. Pack it loosely in a bag or lidded bin and keep it in a cool, dry place off damp floors. The how to store Christmas inflatables guide covers the rest, and the Christmas inflatable setup and care guide will help you set it up again next year. If snow was part of your season, also see can you leave Christmas inflatables up in the snow.

Planning next year’s display? Browse our 6 foot Christmas inflatables.

Frequently asked questions

How do you clean a Christmas inflatable?

Unplug it, then inflate it on a dry day so the fabric is smooth. Brush off loose dirt, wipe it with a soft cloth dampened with water and a little mild dish soap, and wipe again with clean water to remove the soap. Keep water away from the blower, plug, and lights, and let it dry completely before storing.

How do you get mildew off an inflatable?

Spot-test a hidden area first. Many owners use a mix of white vinegar and water on mildew spots, let it sit a few minutes, wipe gently with a soft cloth, and then wipe with clean water. Avoid bleach and harsh scrubbers, which can fade colors and damage the fabric coating. Dry it completely afterward.

Can you put a Christmas inflatable in the washing machine?

No. The blower, wiring, and lights are built into the decoration, and a washing machine or dryer can damage the fabric, seams, and electrical parts. Clean it by hand with a damp cloth instead.

Can you pressure wash an inflatable?

No. High-pressure water can tear seams, force water into the blower and lights, and strip printed details. Use a soft cloth, or at most a gentle rinse kept well away from the blower.

How do I stop my inflatable from getting moldy in storage?

Make sure it is completely dry inside and out before you fold it, store it in a cool, dry place off damp floors, and check it partway through the off-season. Mold and mildew grow when moisture is trapped in the folds.

Featured photo via Pexels.