How to Keep Christmas Inflatables Dry in the Rain

How to Keep Christmas Inflatables Dry

How to Keep Christmas Inflatables Dry is the focus of this guide, written from the product details and setup advice already published on Christmas Inflatables.

Rain is part of the Christmas season in a lot of places, and your yard inflatables have to live with it. The good news: the fabric on most outdoor inflatables is made for it. The parts that need protecting are the blower, the power adapter, and the cord connections. This guide shows you how to set up your Christmas inflatables so they stay dry and safe in the rain, what to do when a storm rolls in, and how to dry them out afterward. It is part of our Christmas inflatable weather and safety guide.

Safety first: use a GFCI-protected outdoor outlet and outdoor-rated cords. Unplug the display before you touch any wet plug, cord, or adapter, and never handle connections that are sitting in water.

What “waterproof” means on an inflatable

Many listings call the fabric waterproof, and that refers to the fabric. The 6 ft highland cow inflatable lists heavy-duty waterproof polyester and an IP65 rating for light rain and snow. The 12 ft gingerbread house and snowflake tree inflatable arch lists 210T waterproof polyester and an upgraded blower so it can be used on rainy days, but also says it is not recommended to use in bad weather. The 6 ft snow globe with Santa and a penguin goes further: if you use it outdoors, its listing says to keep the fan and adapter dry at all times and never submerge them. That is the rule for nearly every inflatable. The fabric can take a shower. The electrical parts should never sit in water.

6 ft highland cow Christmas inflatable in a Santa hat and red scarf

Step 1: Pick the right spot before it rains

  • Go high, not low. Set the base on slightly higher, well-drained ground. Avoid dips where puddles form after a storm.
  • Stay out of splash zones. Keep the blower away from downspouts, gutters that overflow, and sprinkler heads.
  • Mind the intake. Make sure the blower intake does not face into standing water or a spot where mud can splash into it.
  • Think about the cord path. Plan a route from the outlet that stays out of low spots, so no connection ends up in a puddle.

12 ft Christmas inflatable arch with snowflake trees and a gingerbread house roof

Step 2: Protect the plugs and cord connections

Water in a plug or a cord join is the most common reason an outdoor display shuts off after rain. Lift every connection off the ground, use a weather-resistant cover made for outdoor cord connections, and point plug openings downward so water runs off. Use only outdoor-rated extension cords, and keep the run as short as you can. If the outlet keeps tripping when it rains, follow our guide to a Christmas inflatable that keeps tripping the GFCI. Do not wrap a connection in ordinary household tape and leave it on the ground.

This short video explains why covering an inflatable’s fan matters for keeping the blower alive through the season.

If you add any cover near the blower, make sure it never blocks the intake. A fan that cannot pull in air will overheat and cut out. Our guide to a Christmas inflatable fan that is not working or noisy explains what happens when the intake is blocked.

Step 3: Anchor it for wet, soft ground

Rain softens the soil and loosens stakes, and a heavy, wet inflatable is more likely to lean or tip. Use every stake, tether, and sandbag that came with it. The lighted snowman with tree and sign inflatable lists waterproof polyester with reinforced stitching for wind or rain, and comes with 6 stakes, 4 sandbags, and 4 ropes. After a storm, push loose stakes back in and re-tension the tethers. See why a Christmas inflatable keeps falling over for the full anchoring steps.

Lighted snowman Christmas inflatable with a Christmas tree and sign

Step 4: Know when to unplug

Light rain is usually fine for an outdoor inflatable with dry, raised connections on a GFCI outlet. Unplug and let it deflate when:

  • heavy rain, a thunderstorm, or strong wind is forecast;
  • water is pooling around the blower or any connection;
  • the GFCI has tripped and you have not found out why.

A flat inflatable on the lawn is much safer than a running one in a storm. Plug it back in once the rain passes and the connections are dry.

Winter storms can bring snow as well as rain. Our guide on whether you can leave Christmas inflatables up in the snow covers brushing off snow, anchoring on frozen ground, and reinflating.

Step 5: Dry it out after the rain

Once the weather clears, check the display. Unplug it, shake or brush standing water off the top, and clear mud and leaves from the intake. Then plug it back in and let the blower run so air moves through the inside. If the lights went out after the storm, see Christmas inflatable lights not working. If it sags after drying out, our guide to a Christmas inflatable that keeps deflating will help you find the cause.

6 ft inflatable snow globe with Santa, a penguin, and rotating lights

Never put a rained-on inflatable away wet. Our guide on how to dry and fold a Christmas inflatable for storage walks through drying it completely, and the how to store Christmas inflatables pillar guide covers the rest. Ready to add more to the yard? Browse our outdoor Christmas inflatables.

Frequently asked questions

Can Christmas inflatables get wet?

Most outdoor Christmas inflatables are made of polyester that is meant to handle light rain. The fabric is not the weak spot. The blower, the adapter, and the cord connections are. Keep those parts out of puddles and off wet ground, and use a GFCI-protected outdoor outlet.

Should I unplug my Christmas inflatable when it rains?

In light rain, an outdoor inflatable with dry, raised connections on a GFCI outlet can usually keep running. Unplug it in heavy rain, storms, or high wind, and whenever water is pooling around the blower or a connection. Several listings say not to use the decoration in severe weather.

How do I keep the plug of my inflatable dry?

Lift every plug and cord join off the ground, keep it away from downspouts and low spots, and use a weather-resistant cover made for outdoor cord connections. Point connections downward so water runs off. Never wrap a plug in household tape and leave it on the ground.

Why does my inflatable sag after rain?

Rain adds weight to the fabric, and water can pool in folds or on top of the figure. Wet ground can also loosen stakes, letting it lean. Shake or brush off standing water once it is unplugged, re-seat the stakes, and let the blower run on a dry day so it can dry out.

Can I store an inflatable that got rained on?

Not until it is completely dry inside and out. Run it inflated on a dry day, check the seams and the base by hand, and only fold it once it is dry to the touch. Packing a damp inflatable invites mildew.